2020. 4. 10. 18:12ㆍ카테고리 없음
Where does i actually fit? Nearly everywhere. I is a Game-Improvement Iron While definitely not a G-series design, i offers a progressive design where the long irons have a larger footprint, which provides more forgiveness while making it easier to get the ball in the air. In what could be considered a nod to modern game-improvement design, the shaft lengths in the i’s 3-9 irons have been increased by 1/4″ (compared to i25) and lofts in the 3-8 irons have been strengthened by 1° (also compared to i25). I25 has a reputation for being a bit on the short side, i will play a bit more like a game-improvement iron from a distance perspective. While not as broad as those found on many game-improvement designs, soles on the i have been widened through the entire set to provide better turf interaction for a broader range of players.
By using 431 stainless steel for the first time PING was able to save weight. That savings along with a deeper position for the custom tuning port, allowed for more weight to be placed around the perimeter. That along with Tungsten toe weighting increases forgiveness in the 3-7 irons. If that’s not a game-improvement story, then I’ve never heard one. That 431 material along with a softer CTP insert contribute to an iron that offers an overall softer feel than its predecessor. That’s not something we talk about a lot when we talk game-improvement.
Softer feel makes sense because i is a Player’s Iron. PING put a lot of effort into reshaping the i iron to make it. Even with the broader soles, the top rail is over 5% thinner than it is on the i25.
Offset has been reduced too, and by pushing the custom tuning port deeper, PING has made it nearly invisible. The sum total of those three things is an iron with much cleaner lines than its predecessor.
And while it’s true that some better players may not like the bigger long irons, the scoring clubs are comparatively more compact and workable. Toss in PING’s new satin brushed finish and welli is starting to sound like an offering for better players, isn’t it?
I Iron Specs Contradiction or Clever Design There are some apparent contradictions within i iron’s design. Depending on your perspective you may see an iron that doesn’t fit cleanly in any category, or you may see something with near universal appeal. In all likelihood the contradiction is by design. “New technology and clean and traditional are often at odds with each other.”, said PING’s Paul Wood. “i gave us the opportunity to come up with clever ways to combine the two.” As you might imagine, the broad reach of the i iron does blur the lines between models, but PING seems entirely comfortable with that. Potential S55 customers may find the i iron workable-enough and be drawn to the added forgiveness and distance of the i iron, while the potential G30 customer may find it forgiving-enough and long-enough, while being drawn to the added workability of the design. In truth i is a little bit of everything, so for many the decision may simply come down to which design works best or perhaps even what looks right at address.
Zero Upcharge Shafts Like the GMax iron, the stock shaft for the i iron is PING CFS steel or CFS graphite. Dynamic Gold (S300, X100), Project X (5.0, 6.0), DG XP 95 (R,S), and Nippon Modus 3 105 (stiff,x) are now available as no cost upgrades. Textbook PING While the i may not fit cleaning in any one category, the company’s approach to the new iron is emblematic of much of what we appreciate about PING. Just because something new is here, doesn’t mean what you have is obsolete. I is that isn’t likely to make you feel like what you already have is totally obsolete. Like most new PING products, i is a progression that builds upon what came before it without diminishing it. Pricing and Availability PING i irons are available for pre-sale today with finished product shipping to customers on July 30. Per club MSRP is $135 steel and $150 graphite.
Tony is the Editor of MyGolfSpy where his job is to bring fresh and innovative content to the site. In addition to his editorial responsibilities, he was instrumental in developing MyGolfSpy's data-driven testing methodologies and continues to sift through our data to find the insights that can help improve your game. Tony believes that golfers deserve to know what's real and what's not, and that means MyGolfSpy's equipment coverage must extend beyond the so-called facts as dictated by the same companies that created them. Most of all Tony believes in performance over hype and #PowerToThePlayer. Why does ping have to continue to use a tin cheap ass plate in the back cavity with every frigin iron they come out with, ping irons are known for their durability and the plate takes that away cuzz it can easily be nicked and loosen.
I know it dont make a difference the way it plays but its probably added weight that can come off, I saw those ping inserts come off so many times and it is just NOT necessary to have em on there. Their making their irons look like Walmart irons now, but Im sure they still play great. It really turns me right off, its almost like a good looking blonde with braces on her teeth, I mean really PING make em look durable not cheap and now long mizuno ferruls? I know this sounds crazy but I wouldnt even buy em because of the glued on plate, it really makes them look really really chinsy and just bad and thats all I can say. There is a general trend and understandable phase shift towards irons that are both workable and forgiving. This is the vastly populated territory that the Ping i’s are trying to uncomfortably reside in.
Somewhat unfamiliar territory for Ping given their tendency to make bulky thickish weird sounding overly forgiving irons designed for immaculate turf conditions. They have tough perhaps unbeatable competition here in the latest offerings from Titleist, TaylorMade, Callaway and the truly amazing Mixuno JPX 850 pros. Making them look like the TaylorMade Speed Blades doesn’t help either. There is a general trend and understandable phase shift towards irons that are both workable and forgiving. This is the vastly populated territory that the Ping i’s are trying to uncomfortably reside in.
Somewhat unfamiliar territory for Ping given their tendency to make bulky thickish weird sounding overly forgiving irons designed for immaculate turf conditions. They have tough perhaps unbeatable competition here in the latest offerings from Titleist, TaylorMade, Callaway and the truly amazing Mixuno JPX 850 pros. Making them look like the TaylorMade Speed Blades doesn’t help either. Bloor I am in total agreement.
In general, PING irons haven’t looked more “bulky thickish” than other manufacturers for the last decade. They have created some very classic, sleek models since the introduction of the S59 in 2003.
Second, PING irons tend to have more solid feel and unobtrusive sounds because they are obsessed with stabilizing the face behind the hitting area with custom tuning ports. The only exception in recent years may be this GMax iron, which I expect to have different acoustics compared to other models. This would be due to changes in head geometry and CTP location. Lastly, PING irons tend to have more effective bounce than others in their category. This would help turf interaction on not just perfect lies, but bad lies as well. OK, the loft is 1.
stronger; no mention about an distance improvement, so I assume that they are very similar. I have the i20’s and they are fine, so what is the incentive to upgrade? This club is closer to what I would like than past Pings, but Ping could do so much more with the design of these clubs. It appears to me that the i is competing against the likes of the Ben Hogan Ft. Worth irons based on the rave reviews of the Hogans being forgiving for a blade, and comparing looks of the two, the i is the ugly stepchild. If I am going to upgrade, I know which one I’d pick. I range between a 9 and 11 handicap, my buddy is a +4 or better.
Best Shaft For Ping I20 Drivers For Mac Download
We both play i25s and wouldn’t trade them for anything else. We have both been custom fitted for shafts through the Mizuno fitting system. We both liked the feel and ended up choosing KBS (me stiff and soft stepped, him extra stiff) which were also spined. I was playing G20s and too often ballooned them (plus they felt like I was swinging a hybrid with every shot the head was so big). He was playing Mizuno blades with cavity backs for his 3 and 4 (can’t remember the models) and was looking for something a little more forgiving but still workable. With the right shafts (one of the most important things I’ve ever done for my game) the i series irons will fit a lot of different people.
The Ping i20 driver is built for players who want a lower launch profile, more boring shot trajectory and extremely low spin rates, all in a package that offers forgiveness and plenty of distance. Resembling its counterpart the G20 driver more than its predecessor the i15, the i20 driver has incorporated technology to complement the needs of better players. The launch profile of this driver is mid to mid-high, a noticeably lower trajectory than the G20. The CG placement was engineered for very low spin rates, adding more carry and roll to drives for better distance. By rethinking the weighting behind this i-Series driver, Ping has come up with a club that offers better forgiveness than previous models. The neutral swing bias should offer more shot-shaping control for better players.
Ti 8-1-1 Construction This lightweight titanium alloy is used in the clubhead and allows the i20 to maintain strength while shifting weight to the perimeter, resulting in high forgiveness. Aerodynamic Crown By reducing drag on the clubhead during the swing, this driver has increased swing speeds for added distance. Tungsten Sole Weights These high-density weights lower the center of gravity and decrease the amount of twisting the clubhead experiences on miss-hits. Fitting Message Having a driver fit to your game can give you longer, more accurate tee shots. When in the market for a custom fit club, why not start with the manufacturer that helped usher in the custom fitting era of golf for everyone? Using PING nFlight software to analyze your swing, our award winning fitting staff can help you choose the right PING driver. They will also fit your new driver to the specifications that optimize shot trajectory and spin rates for your swing.
By adjusting lie angle, loft and shaft length the fitters at 2nd Swing will make sure you are getting consistently better performance off the tee. It’s simple, follow the trade-in steps and once your clubs arrive you can expect payment within 7-10 business days. When completing the trade-in process you have an option to receive your funds via check, PayPal or receive a 2ndSwing.com eGift Card. Simply chose the payment option that works best for you. Hen completing your online trade-in, you have the option to purchase a FedEx label at an expense of $9.99 per label.
The label charges will be deducted from the total value of your trade-in and can be retrieved & printed from the Order Confirmation page. If you prefer to use your own shipping service, you are welcome to do that at your own expense. Please ship all trade-ins to: 2nd Swing Golf Trade-In Program 6752 Shady Oak Road Eden Prairie, MN 55344 In fact, you'll get 25% more from your clubs in 2ndSwing.com credit compared to when you sell them outright.
Best Shaft For Ping I20 Drivers For Mac Free
Simply select the 'eGift Card' option during the trade-in process and your eGift Card code will be emailed to you after your trade-in has been fully received & processed. The eGift Card can be applied towards the future purchase of any new & used item from 2ndSwing.com. There is no limit on the amount of golf clubs that you can trade in. You can even find values & trade in your used rangefinder or GPS unit!
Please contact our Service & Support team at 612-216-4152. Please have your Order Number ready and reference the tracking number on your shipment to ensure it has been delivered to our facility. Trade values are based on several factors such as demand, condition, release date and other resale factors. Pricing is updated regularly to ensure that you are receiving the highest trade-in value for your used clubs.
The better the condition the higher value given for the item. Condition is evaluated by our knowledgeable staff and the used golf club(s) is priced accordingly. Important:.
Iron sets must contain a minimum of five (5) consecutive clubs with matching shafts, including a Pitching Wedge. If a PW is not included, you will be required to enter each of the irons individually. Clubs that are stamped or engraved will be automatically receive the 'Below Average' value.
Please provide us the information below to help expedite your quote: Please provide dates you need sets delivered to you. Clubs that do not qualify:. Clubs with cracked or dented heads, heads that rattle and clubs with broken shafts. Fitting irons.
Counterfeit clubs. If, upon inspection, 2nd Swing identifies any discrepancies (ex. Wrong model, condition, missing clubs) we will email you to notify you of the discrepancy and the resulting value change (+/-), if any.
Golf club head covers, tool kits, torque wrenches, or other related accessories should be included whenever possible (though are not mandatory). Not every golf club model can be given a market value and these items are typically: rare items, antique items, special or tour issue items and other very high-ticket items. If items are extremely old or damaged, they are also not assigned a market value.
You are always welcome to contact our Service & Support team to inquire about the value of your item(s).