2020. 3. 22. 16:39ㆍ카테고리 없음
Welcome to the tmkkeyboard wiki! TMK Products You can buy here to support this project. (USB-USB, PS/2, ADB, NeXT, M0110, IBM4704, SUN, X68K.). (60% keyboard for Alps SKCM/SKCL). TMK Keymap Editor Keymap editor is available for TMK products. You can edit keymap and download firmware with web browser, you don't have to build firmware from source code.
Build firmware Read this first. Build on Windows Don't use WinAVR with TMK anymore unless you know what you are doing and can help yourself. Instead use one of methods below. (recommended). Build on Mac You can setup tools for AVR with by following commands. And refer to. Brew tap osx-cross/avr brew install avr-gcc brew install dfu-programmer, or may be option if you want.
Flash firmware To flash firmware there are several tools you can use with keyboard or converter. Atmel FLIP. dfu-programmer Atmel FLIP for Windows FLIP install Download from: Driver install See. How to use FLIP. Boot your device into programming mode or bootloader. Usually you can start bootloader with pressing program button or specific key combo, consult with document of your device.
On menu bar click Device - Select, then choose your chip name. (In most cases ATmega32U2 or ATmega32U4). On menu bar click Settings - Communication - USB, then click Open button on USB Port Connection dialog. At this point you'll have to plug into USB and start bootloader. On menu bar click File - Load HEX File, then select your firmware hex file on File Selector dialog. On Operations Flow panel click Run button to load the firmware binary to the chip.
Note that you should keep Erase, Blank Check, Program and Verify check boxes selected. Re-plug USB cord or click Start Application button to restart your controller. See also if needed. Troubleshoot First, try to remove current driver and re-install from Device Manager. FLIP: AtLibUsbDfu.dll not found. Could not open USB device dfu-programmer for Windows, Mac and Linux Install dfu-programmer with package manager like Brew, Mac Port or apt.
Or refer directly. For Windows see. Boot your device into programming mode or bootloader before flashing. Usually you can start bootloader with pressing program button or specific key combo, consult with document of your device. To flash firmware run three commands in terminal(cmd.exe for Windows/Terminal.app for Mac). Dfu-programmer erase -force dfu-programmer flash dfu-programmer reset.
Remove -force if you use 0.6.x version. part will be atmega32u4(for HHKB/FC660C/FC980C Alt Controllers and USB-USB Conveter) or atmega32u2(for other Converters and Alps64). part should be file path to firmware hex file.
Usb Dfu Driver Download
You can copy file path by draging the firmware file from Finder or Explorer into terminal window like. Permission On Linux and Mac OSX you will need proper permission to program a microcontroller and you can use command for this purpose probably. On Linux you also can configure to set permission. QMK Toolbox This probably works for TMK also.
You can download from: Debug Refer this. PJRC hidlisten You can get debug info with this tool. Magic commands for debug Magic keybind is LShift + RShift by default. Magic + H Help. Migic + V Version and build options.
Atmel Driver Download
Magic + D General debug print. Magic + K Keyboard report. Magic + X Matrix state.